
Avant 5 · Endeavant smart cameras
Avant 5: 5-channel recorder with DMS PRO
The Avant 5 is Endeavant's 5-channel recorder for freight: on top of DMS PRO with driver biometric recognition it adds the ADAS camera, blind-spot radar, side and reverse cameras and an in-cab display, recording every camera.
- In-cab alert
- Validated by control center
The unit · up to 5 cameras
5-channel MDVR for freight transport
The Avant 5 MDVR takes every camera, records the shift and sends each event to the platform over 4G, so the alert arrives with what each camera saw in those seconds. If you also need the tray and 360° coverage, the next step is the Avant 8.
- 5-channel MDVR (A050-AI8)Two 512 GB SD cards.
- DMS PRO with biometric recognitionKnows who drives on every alert.
- ADAS anti-collision and BSD blind spotsThe road ahead and both sides.
- Sides, reverse and in-cab displayWith an alert light for noisy cabs.

DMS · the driver
What it detects in the driver
The Avant 5 DMS tracks the driver's face frame by frame and sees at night by infrared, with a photobiological certificate, so the light does not harm the eyes. Here is how AI fatigue detection works.
High-precision fatigue
Microsleep, closed eyes, nodding and yawning.
Phone, smoking, eating or drinking
Behaviors that take hands or eyes off the wheel.
Biometric recognition
Identifies the driver by face.
Distraction and covered lens
Gaze off the road or lens obstruction.
Configurable alerts
Sensitivity and audio prompts per fleet.
Visual alert light
For noisy cabs.
ADAS · the road
What it detects on the road
The ADAS camera watches the road and the BSD radar (A058-BSD13) covers the side blind spots.
Forward collision (FCW)
Lane departure (LDW)
Headway monitoring (HMW)
Pedestrian detection
BSD · blind spots
Radar on both sides.
Harsh driving
Acceleration, cornering and braking via accelerometer.
Components
Avant 5 components
Each Avant 5 camera covers a different point of the vehicle and the main unit syncs them: when an alert comes in, the evidence brings what each one saw in those seconds.

5-channel MDVR
Records the shift · 2 × 512 GB SD

DMS PRO camera (biometric)
Faces the driver · recognizes who drives

ADAS anti-collision camera
On the windshield · faces the road

Side cameras (blind spots)
Both sides, where the mirror does not reach

Rear / tray camera
Reversing and load status

In-cab IPC camera
Cab view with night vision

In-cab display
Shows cameras and alerts to the driver

Seat vibration motor
12 V or 24 V · vibrates with the alert
How it works
From the event in the cab to the report
Avant units process on board, so the in-cab alert does not depend on signal. Every event uploads to Endeavant Cloud with its video and Endeavant's 24/7 Control Center validates it.
- The camera detectsFatigue, distraction or a risky maneuver, frame by frame.
- In-cab alertVoice and seat vibration: the driver corrects right away.
- 24/7 validationThe video reaches Endeavant Cloud and the Control Center validates it.
- ReportRoutes, shifts and drivers with the most risk, built for your operation.
Simulated dataEndeavant Cloud
The alert opens with its evidence
In Endeavant Cloud every alert opens with photo or video, plate, speed, time and place. Classify it, request the full video or notify the supervisor without leaving the screen.
- Video 15 s before and afterOne MP4 per camera, kept 12 months on the platform.
- Works with and without signalWithout coverage, video stays on the unit and uploads when signal returns.
FAQ
Avant 5 FAQ
What does the Avant 5 add over the Avant 3?+
How much video stays recorded on board?+
How does it know who was driving?+
Who reviews the alerts?+
How long does the Avant 5 installation take?+
What happens in areas without coverage?+
Data sheet and quote
Get the Avant 5 data sheet
We email you the Endeavant cameras brochure right away. Tell us how many units and what operation you run and we will put together the quote.

Powered in Perú by
Endeavant S.A.C.


